Skip to main content
615 Chimney, chimney sweep and repair company in Nashville TN 615-431-3789

Liners, Dampers & Fireplace Repair

Chimney liner installation done to the appliance listing, from the first measurement to the last seal

We measure, size, install and seal a chimney liner for new inserts, stoves, gas appliances and unlined chimneys.

Call or text today615-431-3789

Request a site visit

Tell us about your project. We will contact you to confirm the details and set up a time to visit.

Or call 615-431-3789

By sending this you agree that we may contact you about your project. See our Privacy Policy.

Prefer to type? Text your request to 615-431-3789

Chimney Liner Installation

Installing a liner is about getting the details right: the right diameter, the right material, the right connection at the appliance and a seal at the top. A liner that is wrong in any of these will smoke, rust or clog, or fail an inspection.

We confirm what the appliance requires, take measurements from the firebox and the roof, assemble the liner on the ground and lower it from the top. Then we make the connection at the bottom, insulate where required, install the top plate and the cap and test the draw. When a new insert goes into an old fireplace, this is the part that makes it work, and around Middle Tennessee it is among the most common jobs we do.

What you get

Done right, from the first walk-through

01

Appliance directions followed

We use the diameter and parts the manufacturer calls for.

02

Measured on site

The run and the offsets are measured, not estimated.

03

Tight connections

Sealed at the appliance and at the top.

04

Draw tested

We confirm the system draws properly before leaving.

The process

How your service comes together

  1. 1

    Confirm and measure

    We review the appliance requirements and measure the flue.

  2. 2

    Install

    We assemble and lower the liner and connect it at both ends.

  3. 3

    Seal and test

    We seal the top, fit the cap and test the draw.

FAQ

Common questions about liner installation

What size liner do I need?

It depends on the appliance and the flue. We follow the manufacturer's directions and measure the chimney.

Does a new insert need a new liner?

Almost always. A full-height liner connected to the insert is the right way.

How long does installation take?

Often a day, longer for tall or complicated chimneys.

Let us help with your liner installation

Call, text or send the form. Tell us about the property, what you have and what you would like, and we will take it from there.

615-431-3789Text